The Standard Conical with Pins and R Clips is a commonly used connection system for Global Truss F34 trussing. This connection system allows for quick and secure assembly of truss sections.
Global Truss F34 trussing is typically available in standard lengths, such as 1m, 2m or 3m. Each truss section requires conical connectors at each end. The conical connectors have a tapered shape, with one end larger in diameter than the other. The larger end is inserted into the smaller end of another truss section. To connect the truss sections, metal pins are inserted through pre-drilled holes in the conical connectors. The pins pass through both truss sections, aligning them and preventing them from separating. Once the pins are inserted, R clips are attached to the ends of the pins, securing them in place. R clips have a bent wire shape resembling the letter "R" and are designed to prevent the pins from accidentally sliding out.
To assemble the trussing, you align the conical connectors of two truss sections, insert the pins through the holes, and then attach the R clips to secure the pins. This process is repeated for each connection point until the desired truss structure is built.
The Standard Conical with Pins and R Clips connection system is popular because it provides a strong and reliable connection while allowing for efficient and easy assembly. It is widely used in various applications, including stage and lighting setups, trade shows, exhibitions, and other events where modular trussing is required.
Remember to always follow the manufacturer's instructions and safety guidelines when assembling and using Global Truss F34 trussing or any other equipment to ensure safe and proper installation.